131 skills · 779 min

Conventions

The key words MUST, MUST NOT, SHOULD, and MAY in this skill are to be interpreted as described in RFC 2119. They appear only in decision procedures, where following the wrong course either breaks the configuration or loses events silently. MUST marks an absolute requirement, SHOULD a strong recommendation you may have a specific reason to set aside, and MAY a genuine option.

Everything else is ordinary description. A sentence stating how the service behaves carries no keyword, because it is a fact rather than an instruction to you.

When not to use this skill

This skill is only about the new custom event buses, the service you reach with the eventbridgev2 CLI and SDK clients. It does not cover:

• Classic EventBridge, meaning the events API with rules, targets, archives, and event patterns on AWS::Events::Rule. The two services share the events: IAM namespace and some vocabulary, which is exactly why they are easy to confuse. If you are writing a rule, you are not on a new bus. Chapter 3 maps the concepts across if you are migrating.
• EventBridge Pipes, Scheduler, and Schemas (the classic schema registry and its discovery feature). Different APIs.
• Configuring the Firehose service itself, such as buffering hints or record transformation. A Firehose delivery stream is a valid subscriber target; chapter 9 covers that side of it.

Trigger examples

1. “Write a filter so this subscriber only gets orders over $500.”
2. “My producer says PUBLISHED but nothing shows up in the queue. What do I check?”
3. “Should I use PutEvents or PutRawEvents for Protobuf payloads?”
4. “Set up a subscriber that reprocesses everything from the last two days.”
5. “Write a JSONata expression that pulls the customer id out of the event into a DynamoDB putItem.”

Guardrail — where this skill’s own files live (MCP vs local install)

This skill can be loaded two ways, and they resolve the skill’s own bundled files from different places. Determine how the skill was loaded before reading a reference:

• Loaded through the AWS MCP retrieve_skill tool: The skill is not installed on the local filesystem. You MUST fetch each reference via retrieve_skill with the file parameter (e.g. file="references/setup-walkthroughs.md"). Do NOT file_read these paths locally — they do not exist on disk.
• Installed locally (e.g. .kiro/skills/amazon-eventbridge-event-bus/ or ~/.claude/skills/amazon-eventbridge-event-bus/): Read files from the local skill directory using relative paths.

This distinction applies only to the skill’s own packaged files. User data and session artifacts are always read from and written to the user’s working directory. Never fetch or write customer data through retrieve_skill.

Reference files

The chapters below carry the decisions and the failure modes; the detail lives in these files. Load a file when the task matches its row, and do not load them all by default.

1. The three resources

Event bus. The thing you publish to. It routes events and retains them.

Subscriber. A statement of which events you want and where to send them, in one resource. It watches its bus, keeps the events matching its filter, optionally transforms each one, and delivers it to exactly one target. To send one event to several targets, create several subscribers on the same bus.

Event source. A managed feed into a bus, either AWS service events or a partner/SaaS source.

Names and identifiers:

• A bus ARN and a subscriber ARN both end in a service-generated id after the name: arn:aws:events:us-east-1:111122223333:event-busv2/my-bus/exampleid0123456789abcdef. Store the full ARN, not the name, because the name alone does not identify the resource and re-creating a deleted bus with the same name yields a different id.
• Event source names are unique per account, not per bus.
• Three names identify this service and they do not match. The CLI command and every SDK client are eventbridgev2, as in aws eventbridgev2 create-event-bus. IAM actions and ARNs are events, shared with classic EventBridge, as in events:PutEvents and arn:aws:events:...:event-busv2/.... The endpoint host is eventsv2.{region}.amazonaws.com. See chapter 14.

2. A router with a durable log behind it

The bus routes each event to matching subscribers, and it also retains events for a configured period, set per bus with StorageConfiguration.RetentionPeriodInDays (1 to 365 days). Retention is what makes four other features possible: starting positions, pausing and resuming, replay, and a subscriber created today reading events published yesterday. The retention window is clamped at the bus’s creation time, so on a young bus even a recent past timestamp can fall outside it.

3. Coming from classic EventBridge

A classic rule plus its target becomes one subscriber on the new bus. Four new-bus concepts have no classic analogue: retention on the bus itself, a subscriber starting position, pause and resume with a backlog, and two publish APIs with different payload models. That last changes how you write filters, so a classic event pattern ported unchanged works only for PutEvents. The concept mapping, the habits that carry over incorrectly, and a step-by-step migration sequence are in migrating-from-classic.md (opens in a new tab).

4. AWS service and partner event sources

An event source is a managed feed onto your bus. You create one naming a destination bus and one origin, and the service stands up the forwarding on the classic EventBridge side for you. There is no role and no delivery code: the managed path uses the service’s own identity.

Configuration is discriminated and exactly one variant MUST be set:

Both take an optional Pattern, which narrows what forwards and is evaluated on the classic side against the classic envelope. Your pattern MUST NOT carry a source key or a top-level account or region, because the service sets those itself to pin the forward to your account and origin.

A forwarded event arrives as the whole classic envelope. Data holds it, ContentType is application/eventbridge+json, your content is at $events.Data.detail, and the source and detail-type are in SystemMetadata as aws:Source and aws:DetailType. So a classic rule’s source filter does not transfer: the equivalent is a SYSTEM_METADATA filter, {"aws:Source":["aws.s3"]}.

Only that SystemMetadata pair proves an AWS service or partner produced the event. No publish call can write either key. A raw payload can imitate the envelope exactly, so a DATA filter on the payload’s source matches a forgery as readily as the real thing. You SHOULD filter on aws:Source whenever provenance matters, and MUST match its value rather than its presence, because a direct PutEvents sets the key too, from its own never-aws.-prefixed Source.

EventBusArn is immutable. Recovery splits by failure: from CREATE_FAILED or UPDATE_FAILED, UpdateEventSource converges the classic side back to your record, while from DELETE_FAILED the only recovery is another delete.

A bus owner’s control is at create time. CreateEventSource is authorized against the destination bus with an events:source condition key, and RevokeResource is how an owner stops a feed that already exists (chapter 22). Prerequisites, encryption, dead-lettering, and what appears in your classic account are in event-sources.md (opens in a new tab).

5. Choosing a publish API

The choice fixes the payload shape, and the payload shape determines every filter, transformer, and target parameter you go on to write.

Use PutEvents for JSON events where you want the classic-shaped envelope. Use PutRawEvents for binary or non-JSON payloads, your own metadata keys, or a payload delivered exactly as sent.

Both return one result entry per request entry in the same order, so you correlate by index. Each carries either a SuccessCode or an ErrorCode and ErrorMessage. SuccessCode is PUBLISHED or DEDUPLICATED, and DEDUPLICATED is a success, not an error. Code that treats every success as a new event makes deduplication look like delivery.

Publishing Avro or Protobuf requires a schema registry named on each publish request, not on the bus; a registry configured in the wrong place leaves your events undecoded. application/octet-stream needs no registry, because the service does not decode those bytes at all (schema-registries.md (opens in a new tab)).

6. Addressing: where every field lives

Filters, transformers, and target parameters share one addressing model, and it is not the same for the two publish APIs. Every event is delivered under three top-level names: Data (the payload), Metadata (your own keys, PutRawEvents only), and SystemMetadata (service-assigned and ordering fields). A raw-published payload sits directly in Data; a PutEvents payload sits inside the classic envelope, one level down under detail. So the same field is $events.Data.m for one API and $events.Data.detail.m for the other, and the wrong form does not error: it resolves to nothing, the filter matches nothing, and the transformer emits nothing. If you publish through both APIs onto one bus, write expressions that work for both, or give each traffic type its own subscribers; no addressing form spans both. Both envelopes in full, with every SystemMetadata field, are in filters-and-expressions.md (opens in a new tab).

7. Filtering

A subscriber’s FilterConfiguration holds a list of Filters, and an event must match every filter in the list to be delivered: the filters are ANDed, not ORed. Each filter has a Pattern and a Scope (DATA, METADATA, or SYSTEM_METADATA), one filter per scope. A DATA pattern is written against the chapter 6 shape, so one pattern cannot serve both publish APIs; each is correct for exactly one API and silently matches nothing for the other. FilterConfiguration is optional on create, and a subscriber without one receives every event on the bus. A filter that matches nothing is indistinguishable from a broken subscriber, so confirm a should-match and a should-not-match case by observing the target.

8. Transformation

A subscriber’s Transformer has three types: RAW (the default) delivers the payload alone, WITH_METADATA delivers the three-part envelope, and JSONATA delivers the result of an expression. A JSONata expression is wrapped in {% %} delimiters and sees the event as $events, addressed exactly as in chapter 6. Most scalar target parameters also accept an expression in the same form. Some members refuse one and MUST be literals: an API Gateway header name, a message attribute’s BinaryValue, and InvocationType. An expression is only syntax-checked at create, so its result is a delivery-time fact. A JSONATA transformer whose expression throws, or evaluates to nothing, is a customer-fault delivery failure, so you SHOULD test it.

9. Targets and their parameter blocks

InvokeConfiguration carries the TargetArn, the RoleArn, and at most one parameter block, matching the target. A universal target MUST carry its block; every typed block may be omitted. A classic bus and a Firehose delivery stream are both valid targets that take no block at all.

The service resolves the target type from the ARN and checks the invariants it owns before storing anything: that the block matches the target, that the ARN’s region, partition and account are its own, and that every expression parses. It does not mirror the target API’s own parameter grammars, value ranges, identifier limits, or which members that API requires — those stay with the target, so a request the target will reject is accepted at create and fails at delivery.

1. You MUST supply the parameter block a universal target requires. A typed block may be omitted: KinesisParameters: {} is stored, and Kinesis reports the missing PartitionKey when it is called.
2. You MUST NOT put a constant in a per-message field, because a constant deduplication id makes the target discard everything after the first message. Neither form is checked against the target’s range, requiredness or FIFO applicability, so a bad or missing value is a delivery failure.
3. You SHOULD check the target service’s own rules. Existence, reachability, authorization, size after enveloping, and its API’s required fields are enforced by the target, at delivery.
4. You SHOULD confirm at the target, because a PUBLISHED response is not delivery, and neither is an HTTP 200 from a batch API, which can carry individually failed entries.
5. You MUST attach a dead-letter queue and turn on logs before you test, and MUST grant the delivery role sqs:SendMessage on that queue, because a failure otherwise leaves no signal anywhere.

Each rule’s failure mode, the exact rejection messages, and the per-target blocks are in target-configuration.md (opens in a new tab). Before writing the call itself, load target-contract.md (opens in a new tab) for the required-field lists, one working example per target type, and the delivery error taxonomy.

10. Universal targets

A universal target invokes any supported AWS API directly, with no intermediate function. The target ARN has a fixed shape:

Four things to get right, each of which fails at create time with a message that names the problem: apiAction is camelCase with a lowercase first letter (putItem); service is the SDK service id, which is not always the obvious word (Step Functions is sfn); UniversalTargetParameters.Input is required and holds the API request as JSON or a JSONata expression producing it; and BatchConfiguration is required. The service’s validation text abbreviates universal target as “USI target”; the two mean the same thing.

11. Ordering and deduplication

Ordering is a subscriber property. Type is UNORDERED (no guarantee) or FIFO (ordered within an event group), and events are grouped by SystemMetadata.EventGroupId at publish time. A FIFO target enforces its own length and character limits on the group id, and an undeliverable event holds up the later events in its own group while other groups on the same subscriber keep flowing, so keep group ids bounded and do not derive them from unbounded input.

Deduplication happens at publish time, two ways. DeduplicationConfiguration.DeduplicationType: CONTENT_BASED on the request hashes the event content, and CONTENT_BASED is the only DeduplicationType value. To deduplicate on your own key instead, omit DeduplicationConfiguration and set SystemMetadata.DeduplicationId on each entry. A suppressed duplicate returns SuccessCode: DEDUPLICATED either way.

Keep the two ideas separate. Bus-level deduplication decides whether an event is accepted. A FIFO target’s own deduplication id, set in the target parameter block, decides whether that target accepts the delivery. Different fields at different layers, and the second is a per-message value (chapter 9, rule 2).

12. Retries and dead-lettering

RetryPolicy has three members:

Delivery stops at whichever limit is reached first, and a failing delivery is retried until then. So a conclusion that “nothing arrived” is only safe after the MaxEventAgeInSeconds window has elapsed.

OnFailureConfiguration.Arn names an SQS queue for dead-lettering, and SQS is the only supported destination. An event source refuses a FIFO queue there, with the single message OnFailureConfiguration.Arn must name a standard SQS queue: FIFO queues are not supported as EventSource dead-letter queues; a subscriber accepts one, so the two resources differ on this point. Two further limits to plan around: a dead-letter record identifies failed events by id and timestamp and does not carry the payload, so replaying it needs the event still inside retention; and the dead-letter queue must be writable by the delivery role, or the failure has nowhere to go and the events disappear with no signal.

13. Delivery permissions

InvokeConfiguration.RoleArn is the role the service assumes to invoke your target. It MUST belong to the calling account, its trust policy MUST allow the events.amazonaws.com service principal, and that policy SHOULD condition on aws:SourceAccount and aws:SourceArn. It MUST carry the action the target requires (sqs:SendMessage, sns:Publish, lambda:InvokeFunction, kinesis:PutRecords, states:StartExecution, or whatever your universal target calls), and sqs:SendMessage on your dead-letter queue, or deliveries fail, no failure record is written, and nothing is observable.

CreateSubscriber also enforces iam:PassRole on that role, so a role you cannot pass fails with AccessDeniedException before target validation runs. The list understates four: Kinesis delivery calls PutRecords, Firehose PutRecordBatch, API Gateway needs execute-api:Invoke, an API destination events:InvokeApiDestination.

The target ARN is checked at create for shape, type, region, partition and account, but not for existence or reachability: a well-formed ARN naming nothing is stored and fails at delivery.

14. Authorization: what your caller needs

Chapter 13 covers the role EventBridge assumes to invoke your target. This chapter covers what your caller needs to reach the API.

Every action name is events:. The CLI command and the SDK clients are named eventbridgev2, and the endpoint host is eventsv2, but the IAM namespace is events, shared with classic EventBridge. You MUST NOT write eventbridgev2: or eventsv2: in an IAM policy, because neither names an action that exists, and both fail closed: the policy is accepted and grants nothing. A policy written from the command you just ran, granting eventbridgev2:PutEvents, is the usual way this happens. The name-by-name map is in authorization.md (opens in a new tab).

Publishing is authorized against the bus ARN, per entry, with no partial authorization: if one entry fails a condition check the whole request is denied, so a batch is only as authorized as its least authorized entry.

Creating a subscriber or an event source is authorized against the bus, which makes the bus the cross-account grant point: a bus owner decides there whether another account may attach anything.

Forwarding into a bus under a role you supply is authorized at ingestion, per event: a genuine AWS or partner event needs events:PutEvents, and anything you originated needs events:PutRawEvents. So a forwarder carrying both kinds MUST be granted both actions, because granting one silently denies half the stream. The condition keys, the per-create checks, and revocation semantics are in authorization.md (opens in a new tab).

15. Provisioning and resource state

Creating a bus is asynchronous: CreateEventBus returns with State: CREATING, and the bus becomes usable later. Use the waiter rather than a hand-rolled poll, because it fails fast on the failure states and surfaces StateReason instead of spinning to a timeout:

A bus has seven states, and the asymmetry that matters is between the two failure states: UPDATE_FAILED is recoverable in place, and CREATE_FAILED is not. A failed create permits only delete, so that bus must be deleted and recreated. Delete subscribers and event sources before the bus; a bus that still has either rejects DeleteEventBus with ResourceInUseException, and the message names which kind is blocking. Revoked subscribers and event sources do not block the delete.

Creates are idempotent through ClientToken. CreateEventBus, CreateSubscriber, and CreateEventSource each accept one, and a retry carrying the same token returns the original result rather than creating a second resource. An SDK generates a fresh token per call when you omit the field, so a retry your own code issues builds a new request, gets a new token, and creates a second resource. So you MUST supply your own ClientToken whenever a retry can cross a process, a queue, or a workflow step. The mismatch error and the naming collision are in provisioning-and-state.md (opens in a new tab).

16. Updating safely

One rule governs every update API, and getting it wrong silently discards configuration you did not intend to change:

An omitted top-level member means unchanged. A supplied configuration block replaces that whole block.

So an update that supplies Configuration or FilterConfiguration or LogConfiguration in order to change one field inside it clears every other field in that block. An event source updated with its Pattern omitted comes back with no pattern at all, widening its filter to everything, with no warning. So you MUST read the resource, modify the whole block, write the whole block back, and then read it back again, because reading it back is the only way to confirm what was stored.

17. Pausing, resuming, and replay

There is no separate replay API. Replay is a subscriber’s starting position, evaluated against the bus’s retained events, so anything still inside retention can be reread.

• StartingPosition at create time is LATEST (only events published after the subscriber exists) or POINT_IN_TIME (from a point in retained history).
• Pausing is State: STOPPED on UpdateSubscriber. The backlog accrues, bounded by retention, and ResumePosition decides whether the backlog is delivered or skipped on resume.
• Replayed events are marked. SystemMetadata."aws:DeliveryType" reads REPLAY instead of LIVE, so a consumer can make replay idempotent.
• A replay has a startup delay, then runs at live speed, so allow for the delay before concluding a replay is broken.

18. Observability: metrics and logs

Two surfaces tell you what the service is doing, and their defaults are opposite.

Publish metrics are on by default, in the AWS/EventsV2 namespace, on the tuple {EventBus} plus {EventBus, EventSource} for traffic attributed to an event source and {EventBus, PublisherAccount} for ingress bytes. PublishEventsApproximateCallCount against PublishEventsApproximateSuccessCallCount is the cheapest check that your producer is reaching the bus at all. The outcome metrics count calls, not events, so a call that returned a response counts as a success even when every entry in it was rejected; PublishEventsEntryCount against PublishEventsFailedEntriesCount is what says whether events landed. The EventBus dimension value is not the bus ARN; querying with the ARN returns no data and looks identical to no traffic.

Subscriber logs are off by default, and they need two things before they exist: LogConfiguration.Level raised above OFF, and a CloudWatch Logs vended-log delivery wiring the subscriber to a log group. Set both up before debugging a delivery, not after. The delivery setup, the metric list, and the EVENT_DELIVERY_ATTEMPT record fields are in observability.md (opens in a new tab).

19. Verifying delivery

A publish response tells you the service accepted the event. It says nothing about delivery. To know an event arrived, look at the target.

A healthy delivery reaches the target quickly, so an event that has not arrived promptly is probably failing rather than in flight. But “nothing arrived” is only sound after the retry window elapses, because until then a failing delivery is still being retried.

Two counting mistakes make a working setup look broken. Reading an SQS queue without deleting the messages re-reads them, so raw counts overstate deliveries. And a shared target accumulates messages from earlier runs, so use a fresh target per experiment or a marker unique to the run.

20. When it published but never arrived

Nearly every delivery problem presents identically: the publish succeeded and the target is empty. You SHOULD work the ordered procedure in delivery-troubleshooting.md (opens in a new tab); it covers eleven causes ordered by how often each is the answer.

Three shortcuts that do not require opening the file:

• You SHOULD check PublishEventsEntryCount first (chapter 18). Zero means the problem is upstream of the bus and nothing downstream matters yet.
• You SHOULD turn on subscriber logs. INFO with IncludePayload: FULL shows the per-attempt error and the exact target_input sent, without waiting for retries to exhaust.
• To see the event as the service sees it, you MAY add a second subscriber with Transformer: { Type: WITH_METADATA } and no filter, pointed at a queue you own.

21. Errors and client retries

Batch responses are per entry. A publish can return success at the request level with individual entries failed, so check FailedEntryCount and every entry, not just the HTTP status.

Some malformed input fails the whole request instead of one entry. Anything caught while deserializing the request rejects the entire batch and takes the valid entries with it. Validate per entry client-side, and keep batches small enough that losing one is cheap.

Retryable errors. ConcurrentModificationException and ThrottlingException are retryable with backoff. InvalidInputException, AccessDeniedException, ResourceNotFoundException, and IdempotentParameterMismatchException are not; fix the request.

Treat a persistent 500 as a client-side wire-type problem first. The usual cause is a value sent as the wrong JSON type, such as a number where a string is expected or an ISO-8601 string where epoch seconds are. An SDK retries a 500 by contract, and retrying cannot fix a malformed request, so check your types before escalating.

22. Security, encryption, sharing, tagging

• Encryption is EncryptionConfiguration.KmsKeyIdentifier on the bus. Your caller needs kms:DescribeKey on the key at create time, and on a CMK bus every publisher needs kms:Decrypt on that key too, because a caller who cannot read the bus’s events back is not allowed to write them. An unusable key policy on the service’s side settles the bus at CREATE_FAILED with StateReason: KMS_ACCESS_DENIED instead (security-and-sharing.md (opens in a new tab)).
• To share a bus with another account, use AWS RAM. Resource policies are the fallback for what RAM cannot express, and a hand-written policy is invisible to RAM, so you then own tracking it.
• Some operations are restricted to the bus owner, including revoking a shared resource, so a permission grant alone is not always sufficient. Revocation is terminal and scoped to the one resource you name, so stopping an account rather than a resource means also denying it events:CreateSubscriber and events:CreateEventSource in the bus resource policy (authorization.md (opens in a new tab)).

23. Cost, quotas, and platform integration

Four things that change design decisions. Current prices and quota values are on the EventBridge pricing page (opens in a new tab) and in Service Quotas, not here.

• Billing rounds up per KB on both ingestion and delivery, so many tiny events cost more than the byte total suggests; batching related facts into one event is cheaper.
• “Enriched operations” are billed separately: JSONata evaluation, schema deserialization, and CONTENT_BASED deduplication. So prefer a per-entry DeduplicationId, with no DeduplicationConfiguration, when you already have an idempotency key.
• Publishing is throttled per account across both publish APIs, so a service splitting traffic between them draws from one budget. Subscriber management has its own per-account limit, so CreateSubscriber and DeleteSubscriber can be throttled while publishing has headroom. Handle ThrottlingException with backoff (chapter 21).
• CloudFormation covers the new buses under AWS::EventsV2::, with three types. Six subscriber properties are create-only and replacement is delete-then-create, so changing a target ARN in a template can silently drop events published during the gap.