Authoring Log Alerts

Authoring an alert is a measurement problem, not a guessing problem. You are not trying to be exhaustive — you are trying to land thresholds that fire 0–3 times per week on real production patterns, on services that matter.

When to use this skill

• The user asks to “set up alerts” / “suggest alerts” for their project.
• The user wants to evaluate whether a service is producing alertable signal.
• The user has just enabled log alerting and wants a starter set.

When not to use this skill

• Tuning an alert that already exists — that’s a different job (use posthog:logs-alerts-events-list to inspect fire/resolve cadence and posthog:logs-alerts-partial-update to adjust).
• Investigating an active incident — pull rows with posthog:query-logs, don’t author an alert mid-incident.

Tools

Do not call posthog:query-logs during authoring. You need distributions, not rows. Reserve posthog:query-logs for the very end if the user asks “show me a sample of what would have fired” — limit: 10 is plenty.

Workflow

1. Triage — pick candidate services

Call posthog:logs-services for the last 24h with no filters. The response is capped at 25 services and includes a sparkline, so it is small and bounded.

A service is a candidate when both are true:

• log_count is non-trivial (≥ ~1k in 24h — quieter services produce too little signal to alert on).
• error_rate is non-zero, or the user has named the service explicitly.

Skip services with high volume but error_rate == 0 unless the user wants a volume-shape alert (e.g. “warn me if api-gateway suddenly stops producing logs”). Volume-floor alerts use threshold_operator: below and need different reasoning — see references/volume-floor-alerts.md (opens in a new tab).

If the user names a service, treat it as a candidate even without error signal.

2. (Optional) Narrow the filter

If a service has many error sub-types, an alert on “all errors” is usually too broad. Use posthog:logs-attributes-list (try attribute_type: log) and posthog:logs-attribute-values-list to find a discriminator — common ones are http.status_code, error.type, k8s.container.name. Add the narrowing filter to your draft.

Keep it simple: one severity filter + one or two attribute filters is plenty. Multi-clause filters are harder to reason about and rarely improve precision.

3. Baseline — characterise the candidate over 7 days

Call posthog:logs-count-ranges with the candidate’s filters, dateRange: { date_from: "-7d" }, and targetBuckets: 24 (one bucket ≈ 7h). The response gives you bucket counts.

Do not eyeball the percentiles or scale the threshold to the alert window manually. Pipe the count-ranges response into the helper script:

echo '<count-ranges JSON>' | python3 scripts/baseline_stats.py --window-minutes 5

The script returns:

{
  "n_buckets": 12,
  "bucket_minutes": 420.0,
  "alert_window_minutes": 5,
  "stats": { "p50": 12.0, "p95": 71.25, "p99": 126.25, "max": 140 },
  "suggested_threshold_count": 5,

Use suggested_threshold_count as your starting threshold. Read health:

4. Draft and simulate

Pick a starter draft from these defaults — see references/threshold-defaults.md (opens in a new tab) for the reasoning:

Call posthog:logs-alerts-simulate-create with these settings and date_from: "-7d". The response gives you fire_count and resolve_count.

5. Iterate — three rounds, then ship or skip

Target: fire_count between 0 and ~3 over -7d. If outside the band:

When adjusting the threshold, read values from the script’s stats block — never recompute percentiles by hand.

Cap iteration at 3 simulate calls per candidate. If you can’t land in the band in 3 rounds, the metric is wrong — either the filter is too broad, the window is wrong, or the service genuinely doesn’t have a threshold-shape signal. Note it and move on.

6. Ship — create + attach destination

Once a draft simulates cleanly:

1. Call posthog:logs-alerts-create with the validated config. Use a name like <service> error rate (auto) so the user can see at a glance which alerts came from this skill.

2. Call posthog:logs-alerts-destinations-create to wire it to a notification target. An alert with no destination is silent. Supported destination fields:

   • Slack: type: "slack", slack_workspace_id, and slack_channel_id. slack_channel_name is optional.
   • Webhook: type: "webhook" and webhook_url.
   • Microsoft Teams: type: "teams" and webhook_url.

   Always confirm the channel name or webhook URL with the user before attaching. Never wire an auto-generated alert to a production channel without explicit confirmation. If the user is unsure, suggest a low-traffic testing channel for the first few alerts.

If the user wants alerts created in enabled: false state for review-then-flip, pass enabled: false to -create and tell them how many drafts you produced.

Filter shape — required

The filters field on posthog:logs-alerts-create takes a subset of LogsViewerFilters and must contain at least one of:

• severityLevels — list of ["trace","debug","info","warn","error","fatal"]
• serviceNames — list of service name strings
• filterGroup — property filter group

The same shape goes into posthog:logs-alerts-simulate-create‘s filters field. Match the simulate filters to the alert filters exactly — otherwise the simulation is testing a different alert than the one you ship.

Example minimum:

{
  "severityLevels": ["error", "fatal"],
  "serviceNames": ["api-gateway"]
}

Token-economy rules

• One posthog:logs-services call at the start, not per-candidate.
• One posthog:logs-count-ranges call per candidate at targetBuckets: 24. Don’t go above 30 during authoring.
• ≤ 3 posthog:logs-alerts-simulate-create calls per candidate.
• Zero posthog:query-logs calls during the authoring loop.
• Prefer reporting a small set of well-validated alerts over a long list of unvalidated drafts.

Output

Report what you did, in this shape:

• For each shipped alert: name, filters, threshold, simulated fire_count over 7d, destination.
• For each skipped candidate: service name + why (flat baseline, can’t land threshold, low volume).
• Total simulate calls made, total alerts created.

The user should be able to read this and decide whether to disable any drafts before they go live.

Related skills

• investigating-logs — characterize a service’s baseline before alerting on it, and investigate firings after
• authoring-error-tracking-alerts — alert on exceptions rather than log lines