Commands

• init
• add
• push
• submit
• link
• sync
• rebase
• view
• checkout
• unstack
• merge
• Navigation

init

Creates the stack and checks out the last branch in the list, so a single init can lay down the whole chain: gh stack init auth api frontend.

init processes branch arguments from bottom to top. Existing branches are adopted. If the first branch does not exist, it is created from the trunk; each later new branch is created from the branch immediately before it. There is no separate adopt mode — existence decides. --base selects a non-default trunk.

init also enables git rerere. Under a TTY the first run in a repo asks for confirmation; set git config rerere.enabled true beforehand to skip it.

add

• Must run from the top branch of the stack (or the trunk when the stack is still empty). Anywhere else it exits 5 with can only add branches on top of the stack. Run gh stack top first.
• Uncommitted changes carry over. Without -Am, add does not touch the working tree, so staged and unstaged changes follow you onto the new branch. Commit or stash first for a clean start.
• add -Am commits in place when the current branch has no commits yet — for example immediately after init — instead of creating a branch. This is deliberate: the first layer usually needs its content before a second layer exists.
• -A and -u are mutually exclusive, and both require -m.

push

Pushes every active (non-merged, non-queued) branch in one multi-ref push with per-branch --force-with-lease.

Not atomic. Some branches may update while another is rejected. A rejection means that branch moved on the remote; fix that branch and rerun — rerunning is safe and skips what already landed.

push never creates or updates pull requests. Use submit for that.

submit

Pushes each active branch, then creates a PR for every branch that lacks one, basing it on the first non-merged ancestor, then links them into a Stack on GitHub.

• Not atomic. Branches are pushed sequentially with per-branch --force-with-lease. If a later push is rejected, earlier pushes and PR updates stand. Fix the rejection and rerun the same command.
• A fully merged stack cannot be extended. When every PR in the current stack is already merged, submit forks the remaining unmerged branches into a new stack rooted at the trunk and creates it on GitHub, leaving the merged stack untouched.
• Title generation with --auto: a branch with a single commit uses that commit’s subject as the title and its body as the PR body. A branch with multiple commits humanizes the branch name (hyphens and underscores become spaces). There is no flag for a custom title or body; use gh pr edit afterwards.
• --open marks new and existing PRs ready for review; without it new PRs are drafts.
• Requires stacked PRs to be enabled on the repository. If not, submit exits 9 when non-interactive (under a TTY it offers to create ordinary unstacked PRs instead).

link

Creates or updates a stack on GitHub without any local tracking state. This is the path for branches managed by another tool or living in another worktree — see troubleshooting.md.

• Arguments are given bottom to top. Each is a branch name or a PR number; a numeric argument is tried as a PR number first and falls back to a branch name.
• A numeric first argument is treated as a stack number only when a stack with that number exists. In that case the remaining arguments are appended to the top of that stack and you do not re-list its current PRs: gh stack link 7 feature-c. Arguments already in the stack are skipped; arguments belonging to a different stack are rejected.
• Branch arguments are pushed automatically (non-force, atomic). Missing PRs are created with auto-generated titles and correctly chained bases; existing PRs with a wrong base are corrected.
• Stack membership is additive only — link never removes a PR from a stack.

sync

The routine command. Steps, in order:

1. Fetch from the remote.
2. Reconcile with the GitHub stack. PRs added to the stack on github.com are pulled down and appended locally. On divergence, aborts when non-interactive (see troubleshooting.md).
3. Fast-forward the trunk. Skipped when already current; warns when diverged.
4. Cascade rebase when needed. This runs if the trunk moved, a stack branch was fast-forwarded from its remote, or a branch no longer contains its expected parent. Merged PRs are handled automatically. On conflict, all branches are restored to their pre-rebase state and the command exits 3.
5. Push all active branches, atomically.
6. Refresh PR state from GitHub.
7. Sync the stack object — link open PRs into a stack, additively. Only when two or more PRs exist. sync never opens PRs; that is submit.
8. Prune local branches for merged PRs, only when --prune is passed in a non-interactive environment.

rebase

Pulls from the remote and cascade-rebases. Use it when sync reported a conflict or when you need to rebase only part of the stack.

• --upstack rebases from the current branch to the top. This is what you run after editing a lower layer.
• --downstack rebases from the trunk to the current branch.
• --no-trunk skips fetching and the trunk rebase entirely, aligning stack branches with each other only.
• --continue after staging resolutions; --abort restores every branch.
• A merged PR is detected automatically and replayed with --onto against the correct target, so a squash-merged parent does not produce spurious conflicts.
• Starting a rebase while one is in progress exits 7.

view

• --json writes the machine-readable payload to stdout. Its schema is in SKILL.md.
• Bare view opens a full-screen TUI when stdout is a TTY, and prints static text when piped.
• --short prints a compact one-line-per-branch summary and never opens the TUI, but it is formatted for humans; parse --json instead.
• view refreshes PR state from GitHub as a side effect, best-effort — it does not fail when the API is unreachable.

checkout

Accepts a stack number, PR number, PR URL, or branch name.

• A bare number resolves as a stack number first, then a PR number, then a branch name.
• Stack numbers, PR numbers, and PR URLs fetch from GitHub, pull the branches down, and set the stack up locally.
• A branch name resolves against locally tracked stacks only and never contacts GitHub. Use a stack or PR number to pull a stack that is not tracked locally.
• If a local stack already exists over those branches with a different composition, checkout cannot be forced past it. Run gh stack unstack --local first, then retry.
• checkout has no flags. It relies on remote.pushDefault when several remotes exist.

unstack

Removes the stack grouping only. It never deletes pull requests or branches.

• With no argument it targets the active stack — the one containing the current branch — removing it on GitHub and locally.
• With a stack number it works from anywhere in the repository, tracked locally or not, via the API. Local tracking is also removed when present.
• --local removes local tracking only and never contacts GitHub. Combining --local with a stack number that is not tracked locally is an error.
• An unknown stack number exits 2.

merge

• Scope with an argument: pass a PR number to merge that PR and every unmerged PR below it in the stack, or pass a stack number to merge every unmerged PR in that stack.
• All-or-nothing. If any PR in that exact merge set cannot be merged, none are, and the reason is reported.
• The method comes from --squash, --rebase, --merge, or --merge-method <method>. Without one, the last-used method is reused.
• Only basic PR state is checked before merging: open and not a draft. Bypassing merge requirements is not supported for stacks.
• A merge queue on the base branch overrides everything. The stack is added to the queue rather than merged; the queue chooses the method and any method flag you passed is ignored with a warning. Queued PRs are submitted together but land as the queue processes them, so they may merge in separate groups rather than all at once.
• gh pr merge cannot merge a stack. Always use gh stack merge.

Navigation

up, down, top, bottom, and trunk are always non-interactive. up and down accept a count (gh stack up 3). Movement clamps at the stack bounds, and merged branches are skipped when navigating from an active branch, so bottom lands on the lowest unmerged branch.

gh stack switch is a selection menu with no non-interactive path. Use the commands above instead.