> **debugging-executions** — skill 22 of 43 in [n8n-io/n8n](https://skillsdocs.com/n8n-io/n8n). > > Book (all skills, one file): https://skillsdocs.com/n8n-io/n8n.md > Machine manifest: https://skillsdocs.com/n8n-io/n8n/.well-known/agent-skills/index.json > Install the book: `npx skills add n8n-io/n8n` > Upstream: https://github.com/n8n-io/n8n/blob/master/packages/%40n8n/instance-ai/skills/debugging-executions/SKILL.md @ `master` > Raw bytes, no header: https://raw.githubusercontent.com/n8n-io/n8n/master/packages/%40n8n/instance-ai/skills/debugging-executions/SKILL.md > Base for relative paths: https://raw.githubusercontent.com/n8n-io/n8n/master/packages/%40n8n/instance-ai/skills/debugging-executions/ > Licence: Other — https://github.com/n8n-io/n8n > > Content © its authors, served unmodified. Takedown: https://github.com/DreambaseAI/skillsdocs/issues/new?labels=takedown&title=Takedown+request --- name: debugging-executions description: >- Debug failed or wrong-output workflow executions using executions tools. Load when the user reports execution failures, unexpected node output, empty parameter values after a successful run, or a node showing a red or failed expression error. recommended_tools: - executions - workflows --- # Debugging Executions Use this skill when debugging workflow execution failures or successful runs with wrong or empty values. ## When the user reports it still fails Re-run the failing path with `executions(action="run")` (or `verify-built-workflow`) and inspect the real result before responding. Do not restate that the workflow is "fixed", "verified", or "working", and do not attribute the reported failure to a test-harness artifact, stale state, or "it works in production" without a re-run against the failing path. Treat live signals as real: an execution error, partial coverage (`nodesNotReached`), an empty node, or a missing node is a real defect to investigate, not something to explain away. If you genuinely cannot re-run the failing path, say so plainly and name what is unconfirmed instead of repeating a success claim. ## Draft versus live A published workflow runs the version that was published, not the draft you edit. Your save creates a draft, and the draft is not live until somebody publishes it. So a fix to a live workflow changes nothing in production on its own. Two consequences when the user reports a live workflow failing: - **Read the version each execution ran.** `executions(action="list", workflowId)` returns `workflowVersionId` on every row, plus `workflow.activeVersionId` (the published version) and `workflow.draftVersionId`. Only a row whose `workflowVersionId` equals `workflow.activeVersionId` ran the published code. A run of a draft proves nothing about production. A `workflow.draftVersionId` different from `workflow.activeVersionId` means the latest changes, including any fix you just made, are not live. - **Name the version when you invite a retest.** Say whether the user tests the draft or the published version. "Try it again" after a draft-only fix sends the user to the broken published version, and the fix looks like it failed. Do not report a fix as live until the published version is the fixed one. Ask whether to publish it instead. After a publish, a new live run is what confirms the fix — an earlier execution ran the old version. ## Testing event-triggered workflows Use `executions(action="run")` with `inputData` matching the trigger's output shape — do not rebuild the workflow with a Manual Trigger. For trigger `inputData` shapes, read `${N8N_WORKSPACE_DIR}/knowledge-base/reference/trigger-input-data-shapes.md` when a sandbox workspace is available. ## Failed execution `executions(action="debug")` already includes `failedNode.resolvedParameters` — start there. That bundle has `parameters` (raw, with expressions intact), `resolved` (substituted), `failedExpressions` (those that threw), and `emptyResolutions` (those that resolved to `null`/`undefined`/`""` silently). The offending expression is usually visible without a follow-up call. Entries in either list tagged with `reason: "unreconstructable-context"` are NOT real bugs — they reference variables we don't reconstruct in replay (`$vars`, `$secrets`, `$response`, `$request`, `$pageCount`, `$ai`). The value existed at execution time; we just don't have it here. ## Confirming a fix on the node that failed `executions(action="debug")` tells you what the node received. It does not tell you whether your fix works. To learn that, run the node itself: ``` executions(action="run-step", workflowId, nodeName, reuseExecutionId=) ``` `reuseExecutionId` replays the data the node really received and re-runs only that node, so the fix meets the same input that broke it. This is the right first move whenever the user is debugging a **read** node that already failed a real execution: the node ran for real once already, and a mock-only check is what sends the user back for a second session. The action refuses a replay that would re-run a node above the target: an unpinned one the execution never reached, one that failed there, or a loop that did not finish. Pick another execution, or tell the user which node would run again. ### Decide whether the node is safe to run first A step run is a real run. The node uses the user's real credentials and reaches the user's real systems, on the user's real data. Check what the node does before you reach for `run-step`: - **Safe to run.** A read (`get`, `getAll`, `search`, `list`, `download`, a GET HTTP Request), or a transform that touches nothing outside the workflow (Set, IF, Filter, Code without network or filesystem access). Run these. - **Do not run for real.** A write (`create`, `update`, `upsert`, `delete`, `send`, `append`, a non-GET HTTP Request). Running one sends the message, charges the card, or deletes the row — again, and for real. The user asked you to debug the node, not to perform its effect. - **Unsure?** Treat it as a write. Losing a debugging shortcut is recoverable; an un-asked write to the user's data is not. For a write node, debug without running it: read the failed execution with `debug`, inspect the resolved parameters with `get-resolved-node-parameters`, and explain the fix. That is usually enough, because a write node's failures are nearly always in its input or its parameters, both of which you can see without sending anything. If you genuinely cannot resolve it without a real run, say plainly what the node will do to the user's data, and let the user choose. The approval prompt alone is not consent: the user sees a node name, not "this posts to your #general channel". **"It already ran anyway" is not a reason.** It holds only for a node that errored outright and changed nothing. A node that partly succeeded before it failed — a send that delivered some messages and then hit a rate limit — will deliver them again. ### Studying a node on its own with `mockInput` `mockInput` runs the node on items you supply and skips everything above it. This is a good way to study one node by itself, and a normal thing to do while debugging: - probe an edge case the workflow rarely produces — an empty list, a missing field, a zero or negative amount; - hold the input still when the upstream data changes between runs, so two attempts are comparable; - separate "this node is wrong" from "this node gets the wrong input". Reach for it whenever the question is about the node. Use `reuseExecutionId` or a chain run when the question is about the workflow. Keep the claim at the level of the evidence. A mocked run shows the node handles the input you gave it; it shows nothing about what the chain really produces. The result carries `inputMode: "mocked"` and a `mockedNodeNames` list — report the node's behaviour, not the workflow's. Mocked input does **not** make a write node safe. The node still runs for real against the user's systems; only its input is invented, which makes the effect less predictable, not more. ### Running a tool A tool never runs on its own. n8n runs it through the node that owns it — usually the Agent. A step run on a tool therefore behaves like a step run on that Agent: - `mockInput` feeds the **Agent's** input, not the tool's arguments. - `reuseExecutionId` replays the nodes above the **Agent**. - A chain run (neither option) runs every node above the Agent for real. Give one of the two options when a node up there writes. - `ranThroughNodeNames` lists **every** node that can run the tool, not the one that ran it. A tool on several agents lists them all: the engine picks one, and it does not report which. Do not name a single Agent to the user when this field holds more than one. - A tool on two Agents where one runs above the other is refused. Run the upper Agent, then read the tool with `executions(action="get-node-output")`. The tool's own arguments come from `toolArguments` — the values the agent would normally decide: ``` executions(action="run-step", workflowId, nodeName="Search Tickets Tool", reuseExecutionId=, toolArguments={"query": "login fails", "status": "open"}) ``` The example targets a **read** tool on purpose. The write rule above holds here too, and a tool hides the write behind a friendly name: a step run on a "Create Ticket" tool creates the ticket again, and `toolArguments` does not change that. Only run one when the user has accepted a second write. Use the argument names from the node's `$fromAI` calls, which `workflows(action="get-as-code")` shows. Pass a plain string instead for a tool that takes one free-text input (Wikipedia, Code Tool, a vector store used as a tool). A tool that declares `$fromAI` arguments is refused without them: it would otherwise fail for a reason that has nothing to do with the user's problem, and you would report that as the defect. A node that holds several tools is refused outright, because nothing here can name one of its tools the way the agent does: the "MCP Client Tool" node, and every node the MCP registry added, whose type is `@n8n/mcp-registry.`. Run the Agent for those, and read the node's output from that execution. A sub-node that is not a tool — a model, memory, embeddings — cannot be run this way at all. Run the Agent, and read the sub-node with `executions(action="get-node-output")` on **that** execution: n8n records every call a sub-node made while the Agent ran. ## Successful execution with wrong or empty value When `debug` doesn't apply because nothing errored, call `executions(action="get-resolved-node-parameters", executionId, nodeName)` on the node whose output looks off — **do this unprompted**, don't ask the user for permission first. It's a cheap read-only inspection and the only reliable way to confirm whether an empty value came from an expression silently resolving to nullish. Check `emptyResolutions` first; most "this parameter is empty" cases are expressions resolving to `null`/`undefined`/`""`, not thrown errors.